bending stress sentence in Hindi
Sentences
Mobile
- But when alternative bending stress are induced, failure was inevitable.
- For extremely long thermowells, the static component of the bending stresses may govern design.
- In other situations, however, the bending stress of a thin plate cannot be neglected.
- Common elastic moduli are;; and; and common allowable bending stress values are; and.
- The bending stress distribution in a beam does depend on the point of application of the loads.
- This was also due to the unexpected bending stress which progressively squeezed the lubricant out of the gap.
- Bench seat stanchions were moved inboard to reduce bending stress in the seat frames, allowing them to be lighter.
- This is called a " cyclic bending stress " and the aerial lift above is a good example.
- Loaded with only a moment, the peak bending stresses occurs at the outside fibers of a cross-section.
- It may seem counterintuitive at first, but this is because there are no bending stresses in the neutral axis.
- The struts are primarily compression members, but friction at the pin-hub interface induces a bending stress during gate operation.
- That torque is modeled as a "'bending stress "'that tends to change the curvature of the plate.
- This bending stress may be superimposed with axially applied stresses, which will cause a shift in the neutral ( zero stress ) axis.
- For drilled bar-stock thermowells, the most common form of failure is bending fatigue at its base where the bending stresses are greatest.
- Laminated veneer lumber is similar in appearance to plywood without crossbands, and is typically rated by the manufacturer for elastic modulus and allowable bending stress.
- Principal stresses are often expressed in the following equation for evaluating stresses in the x and y directions or axial and bending stresses on a part.
- Using this equation it is possible to calculate the bending stress at any point on the beam cross section regardless of moment orientation or cross-sectional shape.
- Elementary Elastic Bending theory requires that bending stress varies linearly with distance from the neutral axis, but plastic bending shows a more accurate and complex stress distribution.
- While forming the cavity, the laser beam is scanned, a machined surface is formed, and thereafter the work can be cut with a weak bending stress.
- The tool is therefore usually angled so that the movable jaw's area of contact is closer to the body of the tool, which means less bending stress.
bending stress sentences in Hindi. What are the example sentences for bending stress? bending stress English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.